How To Deal With The Surface Of Outdoor Landscape Lights

1. The bottom diameter of the outdoor landscape light and the specifications of the bottom flange should conform to the design plan.

If necessary, the landscape light manufacturer should provide detailed engineering drawings of matching products for consideration by bidders and design plans. The stainless steel plate materials used by outdoor Landscape Lighting manufacturers for landscape lighting must comply with the regulations.

2. The inner and outer surfaces of outdoor landscape lights should be treated with hot-dip galvanized inner and outer surface anti-corrosion treatment process.

The hot-dip galvanized layer should not be too thick, and the surface layer should be gray and not smooth. The left and right anti-corrosion treatments should meet the relevant specifications.

Corrosion resistance test reports and quality test reports for street lights should be provided throughout the construction process.

3. The surface of the outdoor landscape lamp must be solved by color electrostatic spraying, and the color tone should also consider the requirements of the community owner. High-grade architectural coatings should be used for electrostatic spraying.

4. Outdoor landscape lights should be calculated and supported according to the windproof requirements in the national industry standards. In the entire process of project construction, material instructions and supporting calculations related to street lights shall be provided.

For street lamps that are connected by electric welding with steel rings, the engineering contractor shall remove the welded joints before electric welding, and perform welding according to regulations.

5. The design of the hand hole door of the general street light pole used for landscape lighting should be unique.

Plasma cutting machine for doors. The door of household appliances should have both a rod shape and a structure with better compressive strength. It has an effective indoor space for actual operation, and the side door is equipped with installation instructions for household appliances. The gap between the door and the rod should not exceed 1 mm, and has excellent moisture resistance. There is a special tightening system software with excellent anti-theft characteristics. The doors of electrical equipment must have high tolerances.